Ramblin' Dan's

3D Print Design Studio

DSC07528I have purchased three spools of 3D Solutech PLA 3D printing filament. Primarily I picked the brand because the Hatchbox brand I have been using was unable to supply white PLA filament. It’s now available from some suppliers at over four times the usual price. Well over $90 for a kilogram spool. A case of supply and demand I assume.

I discovered the 3D Solutech brand at a normal, around $20.00+ per kilogram price. Back in the affordable ballpark. So I bought three colors, white, black and yellow PLA filament. Reviews* give the PLA a good experience rating, but their ABS product gets poor ratings and a note (review by others) to stay away from their ABS. * Search the Internet for 3D Solutech reviews. Read my update below.

Place of Origin

The company claims to use only (at least for PLA) U.S.A. produced materials and the product is made in the U.S.A. They talk about the ABS material as a mostly Asian product and no direct statement that their ABS is made in the U.S.A. with U.S.A. materials.

All their written statements and websites are written in Chinglish. Very much as if they have been translated from Chinese (or other Asian dialect) to English. This makes me wonder who are they? Really?

At this point I will assume they are who they say they are. Americans like myself like to give the benefit of the doubt. But just having an office in the United States doesn’t make one a “Made in the U.S.A." brand.

3D Solutech says the material to make PLA (corn starch) is produced from corn grown (made) in the U.S.A. I am sure we export a huge amount of that material. Maybe to China?

The 3D Solutech product is packaged similar to Hatchbox, a brand which clearly states it is made in China. It’s OK to borrow a good packaging method. It is very common, within U.S.A. manufacturing, to run several different product names down the same assembly line. It’s a good cost saving manufacturing method. I have personally seen this in the appliance industry. No reason not to suspect this could be the case with Solutech. It’s certainly cheaper than setting up and operating a new process plant in the U.S.A. to maintain a competitive product price.

But until 3D Solutech becomes much more transparent and discloses their actual U.S.A. production facilities, I will have to personally assume for now, it MAY not be a “made in the U.S.A.” product. Note: I am not saying they are not. They just make the statement without any solid proof that I have discovered. So I raise the question. It could be they ARE partnering with some undisclosed U.S.A. manufacturer and don’t want to disclose the fact.

I have bought a lot of Hatchbox, a Chinese made material. So the point is not where it is made. It is the possibility of deceit and the “Made in the U.S.A.” is strictly marketing hyperbole. Business ethics are not the same in all countries. I’ll leave it at that.

We live in a world economy. I totally understand and can work with that fact. But I do like to promote U.S.A. made when I can be absolutely sure...

The Product

With identity left as a bit of a concern, the real question remaining is if the product quality is worth the investment.

It will take some time working with the material to be sure. I have read product reviews from others and most are favorable. So far it has been certainly usable material for most users including myself.

The only details of real concern is consistency of size and material blend components. It’s the same as for any mass produced material from roofing shingles to knitting yarn. There will be small manufacturing variances for which the user will need to make adjustments.

A skilled operator understands the limitations of his tools and material and can produce good results without blaming either for failures. 3D FFF printers are extremely adjustable for manufacturing variance. A few amateur reviewers sometimes are not. Ha! Of course, any product that exceeds physical adjustment limits or user skill is certainly not useful.

The bobbin tray shown was produced with 3D Solutech white PLA and is excellent in all respects. The white color is completely satisfactory.

The 3D Solutech PLA I have used is well within specifications and will produce satisfactory to excellent results for a knowledgeable user. Your experience may vary.

Update 3/23/17

DSC07529I received a spool of ABS when Amazon made a mistake in fulfilling my order for three spools of PLA. The yellow they delivered is ABS. I gave fulfillment a one star for that. I am sure it was not 3D Solutech fault, but it is the only way to rate a botched delivery. I opened the package assuming it was PLA and had a heck of a struggle with bad printing. Once I recognized the odor, I realized it was ABS. The box and spool are labeled ABS. Someone at Amazon just filled the order with the wrong product. Yellow PLA is now marked out of stock at Amazon.

I can find a use for yellow ABS and this is a good opportunity to test the product. With usual ABS temperature settings the printing started working.

I discovered, at least with this first sample, that temperature is VERY critical with 3D Solutech ABS. I was experiencing extreme warping to the point the print would come loose from the bed. I experimented with many settings and bed materials. Even tried a glue stick for the first time. I thought the product might be unusable.

Then I found the ABS sweet spot for my printer at 225C/80C for the head/bed. Absolutely gorgeous prints. Negligible warping, great surface finish and layer adhesion. I will classify the product as having a very narrow temperature band for good results. Excellent results once the printer is dialed in for the material. I am very pleased with the product. I will buy more ABS when I need it.

There may have been product material quality issue with earlier batches of ABS, but the material I have is definitely good. One additional comment. The spool was completely wound full of filament. I didn't weigh it as I have no idea the weight of an empty spool. It seemed like more than usual amount. The problem was that loops kept falling off the side of spool when trying to install it into the printer feed. Almost too much of a good thing. A little finessing avoided a tangle. I use off center hanging of the spool, so once installed excessive spool-off is not a problem.

Update 3/26/17

Three days later and a lot more prints using both 3D Solutech PLA and ABS. PLA is on my delta printer and the ABS is printing on the Cartesian. There is no doubt in my mind that the 3D Solutech PLA materials are good to excellent products. If the pricing remains in line with MY reality and the supply time is reasonable (no long term shortages) it will remain on my preference list. Probably at the top.

However, the ABS remains very finicky and subject to warping, especially the larger the print size. Excellent prints are followed by some very bad ones (extreme warping). As I said earlier, this is very critical narrow range material. I have used only yellow. When the prints are good, they are very good but I can't give it first choice preference as I am confused by this mixed performance. Not sure if the problem is my technique or Solutech material.

 

 

The Author

Ramblin' Dan Kautz

dankautzThere is no doubt one of my hobbies is writing about my hobbies. I read somewhere a long time ago, the best things to write about are the things you know very well. I have been writing and publishing long before the personal computer became the tool of choice.  My first printed and published club newsletter was created in the late 60's.

Read more ...

Our Mission

The intention of this web site and “Ramblin’ Dan’s 3D Print Design Studio” is to promote creative design thinking and demonstrate how ideas can be changed to tangible creations through the proper application and use of Three-Dimensional Printing systems.

Read more ...

Copyright © 2017 TEDatum Publishing . All Rights Reserved.